DİSPEROL® 50H

Disperol ® 50 H – is used to wet and disperse inorganic pigments and fillers in aqueous systems and to stabilize emulsion paints. It prevents thickening. It increases the storage stability of highly pigmented emulsion paints.

Category:

Product Description

Technicial Specifications:

Chemical base sodium polyacrylate;
Color, Appearance light yellow to light brown;
pH 7-8
Density, g/cm³ 1.20±0.05
Active article content, (%) 30±1
Viscosity 25° С, ( mPa*s ) 20-300

Reviews

There are no reviews yet.

Be the first to review “DİSPEROL® 50H”

Your email address will not be published. Required fields are marked *

Scope of application

  • In aqueous interior paints;
  • In aqueous exterior paints;
  • Highly filled and highly pigmented watercolors;
  • In aqueous systems based on polyvinyl acetate, polyacrylic and styrene/acrylic copolymers and homopolymers;
  • In plasters;
  • In primers;
  • In sealants.

Advantages

  • Compatible with most types of mineral fillers and pigments;
  • Its dispersion effect is high;
  • The dispersing effect is rapid;
  • Provides uniform colloidal distribution of particles;
  • Effectively prevents particles from agglomerating and settling;
  • Increases storage stability of highly pigmented emulsion paints
  • It has high storage stability.

Dosage

Disperol® 50Н can be added at the rate of 0.1-1% of the total mass of watercolor.

Advantages

Disperol® 50Н must be entered and dissolved in the water part of the watercolor before mineral fillers and pigments.

Compatibility with other additives

Disperol® 50H is compatible with most of the various additives used in watercolors.

Warning

The composition of the paint and the dosage of the additive should be determined by laboratory tests.

Packaging

Additive can be supplied in bulk. Additionally, it is possible to supply in the following ways:
In 30 kg drum;
In 200 kg plastic barrel;
In 1000 kg IBC tank.

Storage and expiration date

It should be stored at temperatures between +1°С and +40°С. The expiration date is 12 months from the date of production in the
original closed packaging under the specified storage conditions. After the lid is opened, it should be closed tightly again and water
loss should be prevented.

Security precautions

When applying Disperol® 50 H, it is necessary to use protective clothing, gloves, glasses and masks and comply with industrial
safety rules. Direct contact with eyes and skin should be avoided during storage and use. In case of swallowing, seek medical help
immediately. It should be kept away from food.


Related products