Disperol® 160 А – is used to wet and disperse inorganic pigments and fillers in aqueous systems and to stabilize emulsion paints. It prevents thickening. Increases storage stability of highly pigmented emulsion paints.


Product Description

Technicial Specifications:

Chemical base ammonium polyacrylate;
Color, Appearance light yellow to light brown;
pH 7-8
Density, g/cm³ 1,15±0,05
Active article content, (%) 35±1
Viscosity 25° С, ( mPa*s ) 30-500



There are no reviews yet.

Be the first to review “DİSPEROL® 160A”

Your email address will not be published. Required fields are marked *

Scope of application

  • In aqueous interior paints;
  • In aqueous exterior paints;
  • In watercolors containing high amounts of fillers and pigments;
  • In aqueous systems based on polyvinyl acetate, polyacrylic and styrene/acrylic homopolymer or copolymer;
  • In plasters;
  • In primers;
  • In sealants


  • Compatible with most types of mineral fillers and pigments;
  • Compatible with most mineral-based fillers and pigment types;
  • Its dispersion effect is high;
  • The dispersing effect is rapid;
  • Provides uniform colloidal distribution of particles;
  • Effectively prevents particles from agglomerating and settling;
  • Increases storage stability of highly pigmented emulsion paints:
  • Storage stability is high.


Disperol® 160А can be added at the rate of 0.1-1% of the total mass of water dispersion paint.


Dispersant Disperol® 160А must be entered and dissolved in the water part of the watercolor before mineral fillers and pigments.

Compatibility with other additives

Disperol® 160А is compatible with most of the various additives used in water-based paints.


The composition of the paint and the dosage of the additive must be determined by laboratory tests.


Additive can be supplied in bulk. Additionally, it is possible to supply in the following ways:
In 30 kg drum;
In 200 kg plastic barrel;
In 1000 kg IBC tank.

Storage and expiration date

It should be stored at temperatures between +1°С and +40°С. The expiration date is 12 months from the date of production in the
original closed packaging under the specified storage conditions. After the lid is opened, it should be closed tightly again and water
loss should be prevented.

Security precautions

When applying Disperol® 160A, it is necessary to use protective clothing, gloves, glasses and mask and comply with industrial
safety rules. Direct contact with eyes and skin should be avoided during storage and use. In case of swallowing, seek medical help
immediately. It should be kept away from food.